Online Residual Dissolved Chlorine Dioxide controller is widely used for the continuous monitoring and controlling of residual chlorine dioxide value in water solution, such as the automatic control of recirculating water, chlorination control in swimming pool, distribution network of drinking water, swimming pool, hospital wastewater and water treatment engineering.
FEATURE
•Adopting non-membrane constant voltage sensor, no need to replace membrane and electrolyte
•Automatic/manual temperature compensation function
•Optional online data acquisition software
•Able to restore factory Settings
•1 channel 4~20mA current output
•Supports RS485 communication
•2 groups of ON/OFF relay control
•Supports the loT system integration
•Watchdog function
TECHNICAL SPECIFICATION |
|
| Residual Chlorine Range: | 0 - 20.00 mg/L (ppm) |
| Temperature Range : | 0~60°C. |
| Resolution: | 0.01 mg/L, 0.1°C |
| Display: | LCD backlit |
| Accuracy: | better than ±1% or ±0.01 mg/L, ±0.5°C |
| Temperature Comp.: | Manual / automatic, temperature compensation (0~60°C) |
| Set Points : | 02 Nos (High & Low) |
| Control Output : | 02 Nos Potential free Relay (3A, 220VAC / 24VDC) |
| Output 1: | 4 to 20 mA Dc isolated |
| Output 2: | RS 485 MODBUS |
| Environment Condition : | 0~60°C, relative humidity ≤90%. |
| Supply Voltage: | 220 VAC10%, 50/60Hz |
| Mounting : | Panel Mounted |
| Dimensions : | 96 × 105 × 168 mm |
| Weight : | 0.9Kg |
| Protection : | IP 65 |
Catalogue
Catalogue
Manual